Mariner 2WD V6-3.0L VIN 1 (2006)
17. Attach the restraint system diagnostic tool to the vehicle harness side of the passenger side safety canopy module electrical connector.
Vehicles with safety canopies and seat side air bags
18. Remove the driver side D-pillar trim panel.
1
Separate the weatherstrip.
2
Pull out and separate the quarter trim panel at the D-pillar trim panel.
3
Pull out to release the retainers and remove the D-pillar trim panel.
Early build vehicles
19. Disconnect the driver side safety canopy module electrical connector.
1
Slide and disengage the driver side safety canopy module electrical connector locking clip.
2
Push in to release the tab and disconnect the driver side safety canopy module electrical connector.
