mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Hydraulic Control Unit (HCU)|Page 5618 > < Brake Fluid Level Sensor/Switch|Locations|Page 5613
Page 1
background image

Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Hydraulic Control Unit (HCU)

Hydraulic Control Unit (HCU) 

Material

Removal and Installation 

WARNING:  Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If
brake fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally, drink
water and induce vomiting. Get medical attention immediately. Failure to follow these instructions may result in personal injury.
 

CAUTION:  Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled onto a painted or plastic surface, immediately wash it with
water.

CAUTION:  Electronic modules are sensitive to electrical charges. The anti-lock brake system (ABS) module can be damaged if exposed to these
charges.

All vehicles 

1. Disconnect the battery ground cable. 

Hydraulic Control Unit (HCU)|Page 5618 > < Brake Fluid Level Sensor/Switch|Locations|Page 5613