Mariner 2WD V6-3.0L VIN 1 (2006)
Cruise Control Switch: Service and Repair
SPEED CONTROL SWITCH
Removal and Installation
1. Remove the driver air bag module.
2. Remove the 4 screws and the steering wheel cover.
3. Remove the 4 nuts and the steering wheel brace.
-
To install, tighten to 9 Nm (80 lb-in).
4. Disconnect the electrical connectors.
5. Remove the 4 speed control switch screws and the speed control switches.
-
To install, tighten to 7 Nm (62 lb-in).
6. To install, reverse the removal procedure.