Mariner 2WD V6-3.0L VIN 1 (2006)
Fan Shroud: Service and Repair
Cooling Fan Motor and Shroud
Cooling Fan Motor And Shroud
Removal and Installation
All vehicles
1. With vehicle in NEUTRAL, position it on a hoist.
2. Remove the front impact severity sensor.
3. Remove the 2 pushpin retainers from the front bumper bracket.
4. Remove the 2 front grille bolts.
^
To install, tighten to 10 Nm (89 inch lbs.).
3.0L vehicles only
5. Drain the cooling system.
