Mariner 2WD V6-3.0L VIN 1 (2006)
6. Disconnect the transmission cooler hose.
All vehicles
7. Remove the 4 bolts and the 2 radiator brackets.
^
To install, tighten to 10 Nm (89 inch lbs.).
8. Remove the center support lower bolt.
^
To install, tighten to 10 Nm (89 inch lbs.).
9. Remove the nut and the center support.
^
To install, tighten to 10 Nm (89 inch lbs.).
10. Disconnect the cooling fan electrical connectors
11. Remove the 2 cooling fan bolts and the cooling fan motor and shroud.
^
To install, tighten to 10 Nm (89 inch lbs.).
12. To install, reverse the removal procedure.
3.0L vehicles only
13. Fill and bleed the cooling system.
