Mariner 2WD V6-3.0L VIN 1 (2006)
3. Use the special tool to hold the crankshaft pulley and remove the crankshaft pulley bolt.
4. Using the special tool, remove the crankshaft pulley.
Installation
1. Lubricate the front cover and the crankshaft front seal inner lip with clean engine oil.
2. NOTE: Clean the keyway and slot using metal surface cleaner before applying silicone gasket and sealer.
NOTE: The crankshaft pulley must be installed and the bolt tightened within four minutes of applying the silicone gasket and sealer.
Apply silicone gasket and sealant to the end of the keyway slot.
3. NOTE: Lubricate the outside diameter sealing surface with clean engine oil.
Using the special tool, install the crankshaft pulley.
