Mariner 2WD V6-3.0L VIN 1 (2006)
25. From under the rear of the driver seat, slide and disengage the driver seat side air bag module electrical connector locking clip, and then release
the tab and disconnect the driver seat side air bag module electrical connector.
26. Attach the restraint system diagnostic tool to the vehicle harness side of the driver seat side air bag module electrical connector.
All vehicles
27. Install the RCM fuse 33 (15A) to the SJB.
28. Connect the battery ground cable.
Reactivation
All vehicles
1. Remove the RCM fuse 33 (15A) from the SJB.
2. Disconnect the battery ground cable and wait at least one minute.
Vehicles with safety canopies and seat side air bags
3. Remove the restraint system diagnostic tool from the vehicle harness side of the driver seat side air bag module electrical connector.
