mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Headlamp Bulb|Service and Repair|Page 8710 > < Hazard Warning Switch|Locations|Page 8705
Page 1
background image

Headlamp Bulb: Service and Repair

HEADLAMP BULB

Removal and Installation

WARNING:  The halogen headlamp bulb contains gas under pressure. The bulb may shatter if the glass envelope is scratched or if the bulb is
dropped. Handle the bulb carefully. Grasp the bulb only by its base. Avoid touching the glass envelope. Failure to follow these instructions may
result in personal injury.

CAUTION:  The headlamp bulb should not be removed from the headlamp until just before a new bulb is installed. Removing the bulb for an
extended period of time may affect headlamp bulb performance. Contaminants may enter the headlamp where they can settle on the lens and
reflector. Never turn on the headlamps with the bulb removed.

NOTE:  Make sure the headlamp switch and the ignition switch are in the OFF position.

Headlamp Bulb|Service and Repair|Page 8710 > < Hazard Warning Switch|Locations|Page 8705