Mariner 2WD V6-3.0L VIN 1 (2006)
-
Do not carry lighted tobacco or open flame of any type when working on or near any fuel-related components. Highly flammable vapors are
always present and can ignite. Failure to follow these instructions may result in personal injury.
-
Do not carry personal electronic devices such as cell phones, pagers or audio equipment of any type when working on or near any fuel-related
components. Highly flammable mixtures are present and may be ignited. Failure to follow these instructions can result in personal injury.
1. CAUTION: When reusing liquid or vapor tube connectors, make sure to use compressed air to remove any foreign material from the
connector retaining clip area before separating from the tube. Apply clean engine oil to the end of the tube before inserting the tube into
the connector.
Using the special tool, disconnect the quick connect coupling from the tube.
-
Install the special tool onto the tube.
-
Push the tool into the quick connect coupling clip and separate the quick connect coupling from the tube.
Connect - Type IV
1. CAUTION: Make sure the tube clicks into place when installing into the quick connect coupling. To make sure that the tube is fully
seated, pull on the tube.
NOTE: Apply clean engine oil to the O-ring seals.
Install the quick connect coupling onto the tube until fully seated.
Disconnect - Type V
WARNING:
-
Do not carry lighted tobacco or open flame of any type when working on or near any fuel-related components. Highly flammable vapors
are always present and can ignite. Failure to follow these instructions may result in personal injury.
-
Do not carry personal electronic devices such as cell phones, pagers or audio equipment of any type when working on or near any
fuel-related components. Highly flammable mixtures are present and may be ignited. Failure to follow these instructions can result in
personal injury.
