Mariner 2WD V6-3.0L VIN 1 (2006)
13. Remove the passenger side D-pillar trim panel.
1
Separate the weatherstrip.
2
Pull out and separate the quarter trim panel at the D-pillar trim panel
3
Pull out to release the retainers and remove the D-pillar trim panel.
Early build vehicles
14. Disconnect the passenger side safety canopy module electrical connector.
1
Slide and disengage the passenger side safety canopy module electrical connector locking clip.
2
Push in to release the tab and disconnect the passenger side safety canopy module electrical connector.
15. Attach the restraint system diagnostic tool to the vehicle harness side of the passenger side safety canopy module electrical connector.
Late build vehicles
16. Disconnect the passenger side safety canopy module electrical connector.