Mariner 2WD V6-3.0L VIN 1 (2006)
Removal and Installation
CAUTION: While repairing the power steering system, care should be taken to prevent the entry of contaminants or premature failure of the power
steering components can result.
1. Drain the power steering fluid into a suitable drain pan.
2. Remove the 2 power steering pump reservoir bolts.
^
To install, tighten to 8 Nm (71 inch lbs.)
3. Release the clamp and disconnect the power steering fluid cooler-to-fluid reservoir hose.
4. Release the clamp and disconnect the power steering suction hose.
5. Remove the power steering pump reservoir.
6. To install, reverse the removal procedure.
^
Fill the power steering system.