Mariner 2WD V6-3.0L VIN 1 (2006)
14. NOTE: Install a new high pressure hose O-ring seal and a new return hose O-ring seal.
Remove the power steering pressure and return lines.
15. Remove the 2 steering gear mounting bolts.
^
To install, tighten to 115 Nm (85 ft. lbs.).
16. NOTE: Remove the steering gear from the RH side of the vehicle.
Remove the steering gear.
17. To install, reverse the removal procedure.
18. Fill the power steering system.
19. Check and, if necessary, align the front end.