Mariner 2WD V6-3.0L VIN 1 (2006)
Steering Wheel: Service and Repair
Steering Wheel
Removal and Installation
1. Position the steering wheel in the straight-ahead position and remove the ignition key.
^
Rotate the steering wheel until the steering column locks into position.
2. Depower the supplemental restraint system (SRS).
3. Open the cover on the underside of the steering wheel.
4. Remove the steering wheel pinion bolt.
^
To install, tighten to 12 Nm (9 ft. lbs.).
5. Remove the steering wheel.
1
Position the steering wheel rearward.
2
Disconnect the 2 electrical connectors.
6. To install, reverse the removal procedure.
^
Repower the supplemental restraint system (SRS).
