Mariner 2WD V6-3.0L VIN 1 (2006)
Front Steering Knuckle: Service and Repair
Front
Wheel Knuckle
Special Tool(s)
Removal
1. Remove the brake disc.
2. Remove and discard the wheel hub nut.
3. Using the special tool, separate the outer CV joint spindle from the wheel hub.
4. Remove the cotter pin and the tie-rod end-to-knuckle nut.
5. CAUTION: Do not use a hammer to separate the tie-rod end from the wheel knuckle or damage to the wheel knuckle can result.
