Mariner 2WD V6-3.0L VIN 1 (2006)
Clutch Slave Cylinder: Service and Repair
Clutch Slave Cylinder
Removal and Installation
WARNING: Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If
brake fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally, drink
water and induce vomiting. Get medical attention immediately. Failure to follow these instructions may result in personal injury.
CAUTION: Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled onto a painted or plastic surface, wash it immediately with
water.
1. Remove the transaxle.
2. Disconnect the clutch slave cylinder-to-clutch hydraulic fluid tube adapter.
3. Remove the 3 clutch slave cylinder bolts and the clutch slave cylinder.
^
To install, tighten to 12 Nm (9 ft. lbs.).
4. To install, reverse the removal procedure.
Bleed the air from the system.
