Mariner 2WD V6-3.0L VIN 1 (2006)
5. Remove the front insulator bolt.
^
To install, tighten to 90 Nm (66 ft. lbs.).
6. Remove the rear insulator bolt.
^
To install, tighten to 90 Nm (66 ft. lbs.).
7. Remove the nut, bolts and the crossmember.
^
To install, tighten the front bolts to 90 Nm (66 ft. lbs.) and the rear nut to 150 Nm (111 ft. lbs.).
8. Remove the lower rear insulator bolt and remove it from the bracket.
^
To install, tighten to 90 Nm (66 ft. lbs.).
9. To install, reverse the removal procedure.