Mariner 4WD L4-2.3L VIN Z (2005)
Cowl Moulding / Trim: Service and Repair
COWL PANEL GRILLE
Removal and Installation
1. Remove the 2 wiper pivot arms nuts.
-
To install, tighten to 35 Nm (26 lb-ft).
2. Remove the LH and RH wiper pivot arms.
3. Remove the 8 cowl panel grille pin-type retainers.
4. Remove the 8 cowl panel grille caps and screws.
5. Remove the LH cowl panel grille.
6. Remove the RH cowl panel grille.
7. To install, reverse the removal procedure.
-
Adjust the wiper pivot arms.