mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Hydraulic Control Assembly - Antilock Brakes|Service and Repair|Page 4507 > < Electronic Brake Control Module|Locations|Page 4503
Page 1
background image

Hydraulic Control Assembly - Antilock Brakes: Service and Repair

Hydraulic Control Unit (HCU)

Material 

Removal and Installation

WARNING:  Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If
brake fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally, drink
water and induce vomiting. Get medical attention immediately. Failure to follow these instructions may result in personal injury.

CAUTION:  Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled onto a painted or plastic surface, immediately wash it with
water.

CAUTION:  Electronic modules are sensitive to electrical charges. The anti-lock brake system (ABS) module can be damaged if exposed to these
charges.

1. Disconnect the battery.
2. Remove the air cleaner and the air cleaner outlet pipe. 

Hydraulic Control Assembly - Antilock Brakes|Service and Repair|Page 4507 > < Electronic Brake Control Module|Locations|Page 4503