Mariner 4WD L4-2.3L VIN Z (2005)
Brake Pad: Service and Repair
Rear
Brake Pads
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the 2 brake caliper guide bolts.
^
To install, tighten to 35 Nm (26 ft. lbs.).
3. CAUTION: Do not allow the brake caliper to hang by the brake caliper jounce hose.
Remove the brake caliper and secure the brake caliper to the vehicle.
4. Remove the inboard and outboard brake pads from the brake caliper.
5. To install, reverse the removal procedure.
