Mariner 4WD L4-2.3L VIN Z (2005)
4. If equipped with a manual transmission, disconnect the clutch master cylinder feed.
^
Plug the clutch master cylinder feed hose.
5. If installing a new brake master cylinder, remove the brake fluid reservoir.
6. Disconnect the 2 brake line fitting and plug the brake lines and the brake master cylinder ports.
^
To install, tighten to 15 Nm (11 ft. lbs.).
7. NOTE: Install new master cylinder nuts.
Remove and discard the 2 master cylinder nuts.
^
To install, tighten to 25 Nm (18 ft. lbs.).
8. Remove the brake master cylinder assembly.
9. To install, reverse the removal procedure.
^
Bleed the master cylinder.
^
If equipped with a manual transmission, bleed the clutch master cylinder.