Mariner 4WD L4-2.3L VIN Z (2005)
Engine Oil Dip Stick - Dip Stick Tube: Service and Repair
Oil Level Indicator and Tube
Material
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the 5 bolts and the RH splash shield.
^
To install, tighten to 9 Nm (80 inch lbs.).
3. Remove the oil level indictor.
4. Remove the 2 bolts and the oil level indicator tube.
^
To install, tighten to 10 Nm (89 inch lbs.).
5. Remove and discard the oil level indicator tube O-ring seal.
6. To install, reverse the removal procedure.
^
Lubricate a new O-ring seal with clean engine oil.
