Mariner 4WD L4-2.3L VIN Z (2005)
18. Using the special tool, check the position of the camshafts.
^
If it is not possible to install the special tool, correct the engine timing.
19. Install the CKP sensor.
^
Do not tighten the bolts at this time.
20. Adjust the CKP sensor alignment jig.
^
Tighten the bolts to 7 Nm (62 inch lbs.).
21. Connect the CKP sensor electrical connector.
22. Remove the 6-mm (0.23 inch) x 18-mm (0.7 inch) bolt.