Mariner 4WD L4-2.3L VIN Z (2005)
Evaporator Core: Service and Repair
EVAPORATOR CORE
Removal and Installation
NOTE:
-
Installation of a new suction accumulator is not necessary when repairing the air conditioning system except when there is physical evidence of
system contamination from a failed A/C component or damage to the suction accumulator.
-
If an A/C evaporator core leak is suspected, the A/C evaporator core must be leak tested before it is removed from the vehicle.
-
The evaporator core and evaporator housing must be installed as a complete unit.
1. Remove the A/C evaporator core housing.
2. Transfer, the components from the old evaporator core housing to the new evaporator core housing.
3. To install, reverse the removal procedure.
-
Lubricate the new A/C evaporator core with the correct amount of PAG Compressor Oil YN-12-C or equivalent meeting Ford specification
WSH-M1C231-B.