mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Air Bag Disarming and Arming|Page 1969 > < Air Bag Disarming and Arming|Page 1967
Page 7
background image

Reactivation

All vehicles
1. Remove the RCM fuse F33 (15A) from the SJB.
2. Disconnect the battery ground cable and wait at least one minute.

Escape Hybrid, Mariner and late build Escape vehicles with side air bags

3. Remove the restraint system diagnostic tool from the vehicle harness side of the driver seat side air bag module electrical connector.

4. Connect the driver seat side air bag module electrical connector and then slide and engage the seat side air bag electrical connector locking clip.

5. Remove the restraint system diagnostic tool from the vehicle harness side of the passenger seat side air bag module electrical connector.

Air Bag Disarming and Arming|Page 1969 > < Air Bag Disarming and Arming|Page 1967