Mariner 4WD L4-2.3L VIN Z (2005)
3. CAUTION: When reusing liquid or vapor tube connectors, make sure to use compressed air to remove any foreign material from the
connector retaining clip area before separating the tube.
NOTE: Carefully release the locking tabs to avoid breakage.
Release the fuel tube-to-fuel rail quick release coupling primary locking tab.
4. Rotate the primary locking tab to the fully opened position and squeeze the secondary locking tabs to release the locking mechanism.
5. Push the locking mechanism outward and release the tube.
6. Disconnect the fuel rail pressure and temperature vacuum tube and electrical connector.
7. Disconnect the 4 fuel injector electrical connectors.
8. Remove the 2 fuel rail bolts and detach the wiring retainers from the fuel rail.
9. Remove the fuel rail and injectors as an assembly and then remove the spacers.
10. Remove the 4 fuel injector retainer clips and the fuel injectors.
