Mariner 4WD L4-2.3L VIN Z (2005)
Ignition Coil: Service and Repair
IGNITION COIL-ON-PLUG
Exploded View
Removal and Installation
1. Disconnect the battery ground cable.
2. Disconnect the ignition coil electrical connectors.
3. Remove the bolts and the ignition coils.
-
To install, tighten to 10 Nm (89 lb-in).
4. To install, reverse the removal procedure.
-
Apply a small amount of dielectric grease to the inside of the ignition coil boots before attaching to the spark plugs.
