Mariner 4WD L4-2.3L VIN Z (2005)
Seat Heater Control Module: Service and Repair
HEATED SEAT MODULE
Removal and Installation
WARNING:
-
Never probe the connectors on the air bag module or pretensioner. Doing so may result in pretensioner or air bag deployment and may
result in personal injury. Failure to follow these instructions may result in personal injury.
-
The safety belt pretensioner is a pyrotechnic device. Always wear safety glasses when repairing an air bag equipped vehicle and when
handling a safety belt buckle pretensioner or safety belt retractor pretensioner. Never probe a pretensioner electrical connector. Doing so
may result in pretensioner or air bag deployment. Failure to follow these instructions may result in personal injury.
-
To avoid accidental deployment and possible personal injury, the backup power supply must be depleted before repairing or replacing
any front air bag or side air curtain supplemental restraint system (SRS) components and before repairing, replacing, adjusting or
striking components near the front air bag or side air curtain sensors, such as doors, instrument panel, console, door latches, strikers,
seats and hood latches.
Refer to the appropriate Component or System to determine the location of the front air bag sensors.
