Mariner 4WD L4-2.3L VIN Z (2005)
Starter Motor: Service and Repair
STARTER MOTOR
Removal and Installation
WARNING: When performing maintenance on the starting system, be aware that heavy gauge leads are connected directly to the battery.
Make sure protective caps are in place when maintenance is completed.
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the battery ground cable.
3. Remove the starter motor solenoid terminal cover.
4. Remove the starter solenoid wire nut and position aside the wire.
-
To install, tighten to 5 Nm (44 lb-in).
5. Remove the starter solenoid battery cable nut and position aside the cable.
