Mariner 4WD L4-2.3L VIN Z (2005)
Universal Joint: Service and Repair
Driveshaft Universal Joint
Disassembly and Assembly
Special Tool(s)
CAUTION: Do not reuse the bolts and cap straps for either the center U-joint or the rear U-joint. Install new bolts and cap straps or damage to the
vehicle may occur.
NOTE: There is a difference in length of the head of the replacement yoke strap bolts from the production bolts. The longer head pinion bolts can be
used in either location.
1. Remove the driveshaft.
2. Clamp the special tool into a vise.
3. Remove the universal joint cap snap rings.
