Mariner 4WD L4-2.5L (2010)
Rear Door Exterior Handle: Service and Repair
Door Handle Reinforcement - Exterior, Rear
Door Handle Reinforcement - Exterior, Rear
Removal and Installation
NOTE: The door glass must be completely raised.
1. Remove the exterior rear door handle. For additional information, refer to Exterior Rear Door Handle See: Exterior Rear Door Handle.
2. Disconnect the door latch carrier.
1. Release the retainer and position the door latch carrier aside.
2. Remove the exterior rear door handle reinforcement screw.
3. Disconnect the exterior rear door handle reinforcement actuating rod from the rear door latch.
4. Remove the exterior rear door handle reinforcement with the exterior rear door handle reinforcement actuating rod.
5. If necessary, remove the exterior rear door handle reinforcement actuating rod.
6. To install, reverse the removal procedure.