Mariner 4WD L4-2.5L (2010)
3. Invert and remove the cushion cover.
4. Remove the 2 bolts and cushion pivot upper link.
-
To install, tighten to 40 Nm (30 lb-ft).
5. Remove the 2 cushion hinge floor bracket bolts and cushion support-to-floor bracket.
-
To install, tighten to 40 Nm (30 lb-ft).
6. To assemble, reverse the disassembly procedure.
Seat Cushion - Driver
Seat Cushion - Driver
NOTE: Power seat track shown, manual similar.
