Mariner 4WD L4-2.5L (2010)
8. Remove the Camshaft Alignment Plate.
9. Remove the 6 mm x 18 mm bolt.
10. Remove the Crankshaft TDC Timing Peg.
11. Install the upper timing hole plug in the engine front cover.
-
Tighten to 10 Nm (89 lb-in).
12. Apply silicone gasket and sealant to the threads of the lower timing hole plug.
-
Install the lower timing hole plug in the engine front cover.
-
Tighten to 12 Nm (106 lb-in).
