Mariner 4WD L4-2.5L (2010)
2. Using a suitable tool such as center punch or a 5.5 mm (0.216 in) socket and a 101.6 mm (4 in) extension 1/4-inch drive, install a new TR sensor
locking pin.
3. Install the TR sensor detent spring and bolt.
-
Tighten to 13 Nm (115 lb-in).
4. Connect the TR sensor electrical connector.
5. Install the main control cover grommet.
6. Clean the main control cover sealing surface.
7. Apply silicone to the main control sealing surface of the transaxle case.
