Mariner 4WD L4-2.5L (2010)
4. Remove the lower front insulator through bolt and the 2 cross brace bolts.
5. Remove the cross brace nut and remove the brace.
Installation
1. Position the cross brace in place and install the nut.
-
Tighten to 175 Nm (129 lb-ft).
2. Install the 2 bolts for the cross brace.
-
Tighten to 90 Nm (66 lb-ft).
3. Install the lower front support insulator through bolt for the mount.
-
Tighten to 115 Nm (85 lb-ft).
