Mariner 4WD V6-3.0L (2010)
Alarm System Transmitter: Service and Repair
Passive Anti-Theft System (PATS) Transceiver
Removal and Installation
1. Remove the steering column opening cover. For additional information, refer to Instrument Panel - Exploded View in Instrument Cluster / Carrier
&/or Interior Moulding / Trim.
2. Remove the 3 screws and the lower steering column shroud.
3. Disconnect the Passive Anti-Theft System (PATS) transceiver electrical connector.
4. Using a suitable tool (such as a dentist pick), release the tabs and remove the PATS transceiver.
5. NOTE: Replacement of the PATS transceiver does not require the PATS keys to be programmed into the Instrument Cluster (IC) again.
To install, reverse the removal procedure.
