Mariner 4WD V6-3.0L (2010)
Trunk / Liftgate Latch: Service and Repair
Liftgate Window Latch
Liftgate Window Latch
Removal and Installation
NOTE: Make sure the liftgate window glass is in the raised position.
1. Remove the liftgate trim panel.
2. Disconnect the liftgate window latch ajar switch electrical connector.
3. NOTE: Mark the position of the liftgate window latch prior to removing the liftgate window latch bolts.
Remove the 2 bolts and the liftgate window latch.
-
To install, tighten to 12 Nm (106 lb-in).
4. NOTE: The liftgate window latch must be checked to make sure the latch is installed and aligned correctly.
To install, reverse the removal procedure.