Mariner 4WD V6-3.0L (2010)
Vacuum Brake Booster: Service and Repair
Brake Booster
NOTE: Hybrid vehicle shown, gas vehicle similar.
Removal and Installation
All vehicles
1. NOTICE: Do not service the brake pedal or brake booster without first removing the stoplamp switch. This switch must be removed with
the brake pedal in the at-rest position. The switch plunger must be compressed for the switch to rotate in the bracket. Attempting to
remove the switch when the plunger is extended (during pedal apply) will result in damage to the switch.
Remove the stoplamp switch.