Mariner 4WD V6-3.0L (2010)
-
To install, tighten to 25 Nm (18 lb-ft).
4. Remove the 2 A/C compressor bracket bolts and the bracket.
-
To install, tighten the bolts to 25 Nm (18 lb-ft).
5. Disconnect the vacuum pump electrical connector.
6. Remove the vacuum pump bracket nut.
-
To install, tighten to 25 Nm (18 lb-ft).
7. Remove the vacuum pump bracket bolt.
-
To install, tighten the bolts to 25 Nm (18 lb-ft).
-
Position the vacuum pump to release the clamp, detach the vacuum hose and remove the vacuum pump.
8. To install, reverse the removal procedure.
