Mariner 4WD V6-3.0L (2010)
1. Drain the cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding See: Service and Repair.
2. Remove the cooling fan motor and shroud. For additional information, refer to Cooling Fan Motor and Shroud See: Radiator Cooling
Fan/Radiator Cooling Fan Motor/Service and Repair.
3. Disconnect the radiator-to-degas bottle hose and upper radiator hose from the radiator.
4. Disconnect the degas bottle-to-radiator hose from the radiator.
5. Disconnect the lower radiator hose from the radiator.
6. Remove the 2 A/C condenser-to-radiator bolts and position aside the A/C condenser from the radiator.
-
To install, tighten to 8 Nm (71 lb-in).
7. Remove the radiator.
8. To install, reverse the removal procedure.
9. Fill and bleed the cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding See: Service and Repair.