Mariner 4WD V6-3.0L (2010)
damage to the engine may occur.
NOTE: Install a 3/8-in ratchet and extension into the D-slot on the rear of the intake camshaft to hold the camshaft in place for tightening of the
camshaft phaser and sprocket bolts.
Tighten the 3 RH camshaft phaser and sprocket bolts to 18 Nm (159 lb-in).
7. Install the timing drive components. For additional information, refer to Timing Drive Components See: Timing Components/Service and
Repair/Removal and Replacement.