Mariner 4WD V6-3.0L (2010)
Position the lower cylinder block and install the new bolts and new studs.
Tighten the bolts and studs in the sequence shown in 4 stages.
Stage 1: Tighten fasteners 1 through 8 to 25 Nm (18 lb-ft).
Stage 2: Tighten fasteners 9 through 16 to 40 Nm (30 lb-ft).
Stage 3: Tighten fasteners 1 through 16 an additional 90 degrees.
Stage 4: Tighten fasteners 17 through 22 to 25 Nm (18 lb-ft).
