Mariner 4WD V6-3.0L (2010)
7. Verify that the RH camshafts are in the neutral position.
8. Remove the RH timing chain tensioner arm.
1. Remove the 2 bolts.
2. Remove the tensioner.
3. Remove the tensioner arm.
9. Remove the 2 bolts and the RH timing chain guide.
-
Remove the RH timing chain from the engine.
10. Rotate the crankcase clockwise 600 degrees (one and two-third turns) to position the crankcase keyway in the 11 o'clock position. This will
position the LH camshafts in the neutral position.
11. Verify the LH camshafts are in the neutral position.
