Mariner 4WD V6-3.0L (2010)
11. Remove the 2 glove compartment latch striker screws and the glove compartment latch striker.
12. Remove the lower center instrument panel trim screw.
13. Remove the 4 lower steering column opening instrument panel trim screws.
14. Disconnect the headlamp switch and the message center switch electrical connectors.
15. Remove the 2 upper corner instrument panel trim screws.
16. Remove the 2 lower corner instrument panel trim screws.
17. Remove the 2 instrument panel support-to-defroster duct screws.
18. NOTE: The instrument panel trim will need to be positioned away from the instrument panel support to access the LH duct assembly upper center
screw.
Remove the 4 LH duct assembly screws and remove the LH duct assembly.
19. NOTE: The instrument panel trim will need to be positioned away from the instrument panel support to access the RH duct assembly upper center
screw.
Remove the 4 RH duct assembly screws and remove the RH duct assembly.
20. To assemble, reverse the assembly procedure.
