Mariner 4WD V6-3.0L (2010)
High Pressure Safety Valve HVAC: Service and Repair
Air Conditioning (A/C) Pressure Relief Valve - 2.5L, 3.0L (4V)
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.
2. Recover the refrigerant.
3. Remove the A/C pressure relief valve and O-ring seal.
-
To install, tighten to 10 Nm (89 lb-in).
4. NOTE: A new O-ring seal will already be installed on the new A/C pressure relief valve service part.
To install, reverse the removal procedure.
-
Add the correct amount of clean PAG refrigerant oil to the refrigerant system.
5. Evacuate, leak test and charge the refrigerant system.