mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 8371 > < Initial Inspection and Diagnostic Overview|Page 8369
Page 4
background image

-

Is the resistance less than 5 ohms between the interior rear view mirror and the IC, and greater than 10,000 ohms between the interior
rear view mirror and ground?

Yes

GO to A6.

No

REPAIR the circuit. CONNECT the negative battery cable. CLEAR the DTCs. REPEAT the self-test.

-------------------------------------------------
A6 CHECK THE COMPASS (-) COMMUNICATION CIRCUIT FOR AN OPEN OR SHORT TO GROUND

-

Measure the resistance between the interior rear view mirror, harness side and the IC, harness side; and between the interior rear view mirror,
harness side and ground as follows:

-

Is the resistance less than 5 ohms between the interior rear view mirror and the IC, and greater than 10,000 ohms between the interior

Initial Inspection and Diagnostic Overview|Page 8371 > < Initial Inspection and Diagnostic Overview|Page 8369