Mariner 4WD V6-3.0L (2010)
Yes
For the license plate lamps, REPAIR circuit GD149 (BK) for an open. TEST the system for normal operation.
For all others, GO to P5.
No
REPAIR circuit CLS30 (VT/WH) or circuit CLS30 (RD) for an open. TEST the system for normal operation.
-------------------------------------------------
P5 CHECK FOR VOLTAGE TO THE INOPERATIVE PARKING LAMP USING THE CONNECTOR GROUND
-
Measure the voltage between the inoperative lamp, harness side as follows:
-
Is the voltage greater than 10 volts?
Yes
INSTALL a new bulb holder. TEST the system for normal operation.
No
REPAIR the ground circuit in question for an open. TEST the system for normal operation.
-------------------------------------------------
P6 CHECK FOR CORRECT SJB OPERATION
-
Disconnect all the SJB connectors.
-
Check for:
-
corrosion
-
damaged pins
-
pushed-out pins
-
Connect all the SJB connectors and make sure they seat correctly.
-
Operate the system and verify the concern is still present.
-
Is the concern still present?
Yes