Mariner 4WD V6-3.0L (2010)
4. Attach the wiring harness retainer to the cowl stud bolt.
5. Restore the module configuration. Carry out the module configuration restore steps of the Programmable Module Installation (PMI) procedure.
For additional information, refer to Information Bus. See: Information Bus/Testing and Inspection/Programming and Relearning
6. Reprogram the PATS. Carry out the Parameter Reset procedure. For additional information, refer to Antitheft and Alarm Systems. See:
Accessories and Optional Equipment/Antitheft and Alarm Systems/Testing and Inspection/Programming and Relearning/Anti-Theft - Passive
Anti-Theft System (PATS)/Passive Anti-Theft System (PATS) Parameter Reset
7. Using the scan tool, perform the Misfire Monitor Neutral Profile Correction procedure, following the on-screen instructions.
