Mariner 4WD V6-3.0L (2010)
3.0L vehicles
7. Cut the exhaust system as indicated in illustration.
2.5L hybrid vehicles
8. Cut the exhaust system as indicated in illustration.
Installation
NOTICE: The exhaust hanger insulators are constructed of a special material. Use only the correct specification exhaust hanger insulator or
damage to the exhaust system may occur.
NOTE: Check the exhaust hanger insulators for damage and fatigue. Install new exhaust hanger insulators as required.
NOTE: Thoroughly clean the sealing surfaces of the flanges using a finishing pad.
1. NOTE: Do not tighten the service clamp at this time.
Install the service clamp onto the catalytic converter section.
2. Install the catalytic converter section and service clamp onto the muffler section.
