Mariner 4WD V6-3.0L (2010)
4. Disconnect the EVAP canister purge tube-to-EVAP canister quick connect coupling. For additional information, refer to Fuel Delivery and Air
Induction.
5. Disconnect the EVAP canister fuel vapor tube-to-EVAP canister quick connect coupling. For additional information, refer to Fuel Delivery and
Air Induction.
6. Remove the EVAP canister from the tray.
7. Depress the locking tab outward, rotate the EVAP canister vent solenoid clockwise and remove it from the EVAP canister.
8. NOTE: Do not apply oil to the EVAP canister O-ring seal. Clean water may be applied to aid reassembly.
To install, reverse the removal procedure.
-
Carry out the Evaporative Emission System Leak Test. For additional information, refer to Evaporative Emission System Leak Test See:
Testing and Inspection.