Mariner 4WD V6-3.0L (2010)
7. Remove the Fuel Pump (FP) module access cover.
8. NOTE: Place absorbent toweling in the immediate surrounding area in case of fuel spillage.
Disconnect the fuel tube-to-FP module quick connect coupling. For additional information, refer to Fuel Delivery and Air Induction.
9. Disconnect the Evaporative Emission (EVAP) canister purge tube-to-vapor tube quick connect coupling. For additional information, refer to Fuel
Delivery and Air Induction.
10. Release the fuel tube bundle retainer clips and remove the fuel supply and vapor tubes.
11. Disconnect the fresh air tube from the EVAP canister.
12. Release the 3 pin-type retainer clips and remove the fresh air tube.
13. To install, reverse the removal procedure.
